Tire Block Order Form

Tire Block Order Form
Giving tire treads a new life

Finally - A Mounting Block that Stays Put

Heavy - No need to anchor to ground (but can be)

Will not tip when bumped

Rubber construction is safe for use around horses

Not effected by weather

Different heights available

U.S. Patent 6,268,035

Environmentally friendly

Mount block from either side

Plenty of room on block for instructor assistance

No need to remove from arena

Easy to move, but not portable

Mounting Block - Data Sheet

#	Steps	Tire Blocks	Price ($)	Price/block	Height	Wt (lbs)
	1	1	6.50	6.50	8"	100
	2	3	18.00	6.00	16"	200
	3	6	34.50	5.75	24"	600
	4	10	55.00	5.50	32"	1000
	5	15	78.75	5.25	40"	1500
Specify block height (optional)					Range is 4 to 12 inches
Tire blocks are approximately 24" in diameter

Block Size		Tire blocks vary in height from below 6" to above 10" with most approximately 8" high. You can specify the height of the blocks if you want smaller or larger steps in your mounting block.
Weight		A typical 8" tire block weighs approximately 100 pounds.
Stability		When the tire blocks are stacked the shear weight keeps them in place. When stacking higher than 24" additional stability is suggested by driving a 2" pipe through the center of the block into the ground below or driving large staples/rods directly through the blocks.
Relocating		Simply tip the block to its edge and roll.

If interested in purchasing the tire block mounting steps please complete the section below.

[ Home ] [ Up ]